How to Mount GoPro on ATV Helmet? – Explore 5 Different Options

Last Updated on December 14, 2023 by ATVNotes

ATVNotes is reader supported, If you buy anything through links on our site, we may earn an affiliate commission. Learn More.

Investing in a GoPro camera should top your list if you enjoy hands-free shooting when riding your ATV. But getting a top-quality camera will not ensure premium quality content. For optimal results, you should know how to mount GoPro on ATV helmet so that you can capture amazing footage along your favorite OHV trails.

Depending on your personal preference and riding style, there are various mounting options: front mounting, side mounting, chin mounting, vented strap mounting, and under-visor mounting, as well as off-helmet mounting or chin-strap mounting. I have found that the adhesive mount stands out as the preferred choice for optimal attachment and this is endorsed by the manufacturer also.

However, each mounting option offers a unique perspective. Better, you learn about all of them and decide. In this article, we shall look at all the options for mounting GoPro on your preferred ATV helmets and elsewhere.

Is Motocross, ATV, or dirt bike helmet GoPro mount illegal?

Not really. As long as your GoPro camera does not corrupt your ATV helmet’s structural integrity, be sure you will be good to go. To put this into perspective, you should not drill holes in the ATV helmet.

Instead, you should stick the GoPro to the ATV helmet or, better still, install it using a suction cap. Once you do this, you can better view your trail, take measurements of your riding performance, and so much more. You must consult your attorney about the legality of mounting Gopro on your motorcycle or ATV helmet.

Mount GoPro on Your ATV helmet in 5 Different Ways

Now that you know it is not illegal to mount GoPro camera on your ATV or motorcycle helmets, the time is ripe for you to know how to mount this device on your dirt bike helmet. Here are the steps on how to fit your ATV helmet with a GoPro mount:

1. Prepare your helmet

Before you get started with anything, there is a need for you to prepare your helmet first. Here, you should first ensure that your ATV helmet is clean. This is because the helmet can be dirty due to dirt and dust.

Thankfully, you can now get rid of these elements using a clean wet piece of cloth. Once you wipe the helmet gently, let it dry for about 30 to 60 minutes. Thereafter, you can proceed to the next step.

2. Get your mount ready

You need not drill your ATV helmet to set up any GoPro mount to remain fixed in place while it is on your helmet. Depending on the mount type, your mounting spot and mount can vary. You can pick and choose one or several mounting options from these:

how to mount Gopro on a helmet without adhesives


GoPro Flat and Curved Mounts

Unlike other mounts, these come with basic features. Besides this, you can also mount them on any flat or curved surface on your ATV helmet, and your camera will be held firmly in that particular position. 

For optimal results, consider purchasing several adhesive mounts with waterproof properties so you can move your GoPro Hero from one mount to another the way you, please. Thankfully, these mounts can easily be dislodged by applying heat using a hairdryer or a heat gun.

GoPro Side Mount

As the name suggests, the above-mentioned mount can readily be attached to your ATV helmet’s side. Since this mount can be attached to the side of the helmet, it is ideal for those riders who do not like wearing full-face helmets. Unlike the front mount that offers a centered angle, this one offers slightly off-center angles.

The good news is that this mount can be attached to nearly all GoPro models. Besides being able to be attached to the side of the ATV helmet, this mount comes with an adjustable 3-way pivot. Finally, its pack has a side mount, curved adhesive mount, and mounting gears.

GoPro Front-Facing Mounts

You can attach this mount to a flat surface on your helmet to take a selfie or a self-portrait and front-facing angles whenever you are riding your ATV. All you need to do is to attach it to the base of your mount to any part of the helmet and then allow it to sit for about 24 hours. 

With this under visor mount, you can set your camera low on the front part of your ATV helmet. This makes it ideal for those riders who want to record themselves as they ride their ATVs. Since it is made from a polycarbonate body, this mount can last for ages without getting spoilt.

Chest Mount Harness

Apart from the mounts discussed above, you can get the Chest Mount Harness and capture high-quality footage with your GoPro Camera. This mount usually offers a view slightly lower than your ATV helmet.

With this kind of view, all your footage and photos will have the much-needed immersive perspective. This mount is compatible with nearly all sorts of GoPro cameras; availing of this mount is worth investing in.

Vented helmet strap mount

The above-mentioned mount type is ideal for those riders looking for a more detachment or attachment process whenever they want to fix cameras on their ATV helmets. Once you get this mount, you will attach the camera to your helmet using a Velcro strap. Fortunately, this type of mount works magic with nearly all sorts of helmets with elaborate ventilation systems.

After all, you will use the venting holes to attach the mount to the ATV helmet. This mount gives you a better view of the frontal images. In fact, the images will be those of a POV shot.

Helmet Chin mount

By considering this type of mount, you can record crazy videos of the picturesque trails you are hitting. The mount will stimulate your POV, enabling you to capture real and high-quality videos. Note that the chin mounts you can get in the market are specifically designed to fit into your ATV helmet’s chin region below the goggles. You can attach the mount to the helmet’s chin region with high-quality boding tape and be all set.

3. Attach the mount to the ATV helmet

With the mounting spot selected, it’s time to make your hand dirty – accomplishing the key task of attaching the chosen mount to its designated location on the helmet or elsewhere. When attaching the mount to the ATV helmet, you will need the following equipment:

  • A pencil
  • A GoPro quick-release buckle
  • A measuring tape
  • Isopropyl Alcohol

Ensure that your desired mounting position is clean from dirt and debris, as these elements can weaken your adhesive in the long run. You can apply the much-needed pressure on the mount with bare hands to make it firm and good to go.

4. Install the GoPro camera in the mount

Once the mounting adhesive is attached, you can now go ahead and install your GoPro camera on it. Here, you must use the quick-release buckle to complete the work. When it comes to the camera angle, you can adjust it to the direction you please. Thereafter, you should leave the GoPro on your ATV helmet for 12 hours.

If you start using the ATV helmet right away, chances are that the mount will just come off. Once the mount and the camera are in place, you can wear your ATV helmet and enjoy your off-road adventure.

Which is the best location to mount your GoPro on an ATV helmet?

You are free to mount your GoPro in any location on your ATV helmet. However, consider positioning the GoPro camera in a centered position to capture better footage of the panoramic ATV trails you ride.

Gopro under visor mount


As far as the central position is concerned, be certain that it can either be at the top of your helmet, sides, or the front of your ATV helmet. In case you want to record those riders behind, place it at the back of your ATV helmet. Therefore, your needs will dictate where you want to mount your GoPro on an ATV helmet.

Should I get an official GoPro ATV helmet mount?

Well, not really. The good news is that many off-brand mounts can enable you to mount your GoPro camera on your ATV helmet. Since most of these models come at a budget-friendly price, trust that you will not have to dig deeper into your pocket to avail them.

It does not hurt to obtain an official helmet mount. Unlike other models, this one comes with a swivel mount. With a swivel mount, you will not grapple with flexibility issues whenever you want to adjust your GoPro to capture images of the mind-blowing sites from different angles.

Here, you can move your GoPro camera up and down to the sides or spin it if you please. As a result, you will enjoy unprecedented flexibility in video recording.

Can the GoPro adhesive mount come off?

Yes. GoPro adhesive can come off. All you need to do is switch on a hair dryer and then aim it at the adhesive for 3 to 5 minutes. You can keep checking every minute whether the adhesive is coming out. Ideally, the de-gluing process should go on for about 5 minutes.

Once the adhesive is loose, consider fitting the buckle mount to make the removal process easier and more seamless. In case you do not have a buckle mount, consider using a sharp object or your hands, and you will be good to go.

Can I reuse the GoPro adhesive mount?

No. However, we have brands such as Scotch that make double-sided adhesive tabs that are even reusable. Unlike other adhesive tables you might find in the market, this one can fit on the adhesive mount once it comes off your helmet. 

This adhesive is of low quality compared to the one used on official GoPro mounts. Therefore, reusable tabs might only last briefly before they become less useful.

How can I avoid my GoPro coming off my ATV helmet?

Well, if you apply the adhesive correctly, you do not have to worry that it will fall off your ATV helmet anytime soon. In fact, most adhesive tapes have a lifespan of about 24 months or thereabout.

Once your adhesive tape is about 24 months old, consider changing it to optimize your GoPro camera’s safety. You can even test its firmness using your hands. Ideally, the adhesive should not move at all. In case it is loose, the time is ripe f you change it.

is it illegal to mount Gopro on a motorcycle helmet


Vital tips on how to capture a good GoPro footage

Every ATV rider desires to take high-quality footage using their GoPro camera. This is the reason why you should consider mounting your GoPro correctly. Here are some tips that can help you shoot the best footage while riding your ATV:

  • Before anything else, learn to utilize the GoPro before you mount it on your ATV helmet.
  • Ensure your camera is well mounted on the ATV before heading on an off-road zone.
  • Consider using an external microphone so that you can also enhance your audio.
  • Ensure that you mount your GoPro at an angle that offers much-needed visibility. You can even carry out some test recordings at your home and see how it goes.
  • Do not mount your GoPro below the ATV; you will not get the best footage.
  • Ensure that you mount your GoPro as close as possible to the eye level of your subject so that your footage feels personal and closer.
  • Consider investing in the best dirt bike helmet, GoPro mount, for the best results.
  • Ensure that you keep your camera steady so that you can get the best footage. Consider using a high shutter speed to avoid blurry images.
  • Once you capture all the videos and photos in the field, remember to edit them so that you can share them with your friends and family on social media.

Wrap Up

From capturing stunning photos to getting the best video footage, there are many benefits of GoPro mounting on your dirt bike/motocross/ATV helmet. However, you need to learn how to mount GoPro on an ATV helmet to get the desired results. Setting up a GoPro mount on the helmet is as easy as selecting the suitable mounting option. Here I have offered all the mounting alternatives; it’s now up to you to find which one is best for you. That said, any mounting options will help you record your off-road ventures – the exciting memories of your ATV riding experience.

Leave a Comment